Collection: Self Levelling Compound

Self levelling compound: floor levelling screed to get a floor ready for tiling

About this range

A floor has to be flat and sound before tiles, vinyl or LVT go down, and a self levelling compound is how you get there. Poured over the base, it flows out and self-smooths to a level finish. We sell two rapid set floor levelling compounds, by the 20kg bag or the pallet of 54.

What's in this collection

  • Self-Level Levelling Compound 20kg, rapid set. For evening out a subfloor before a floor finish. Single 20kg bag or pallet of 54.
  • Fast Flex Floor Levelling Compound 20kg, grey. Rapid set and flexible, for boards and floors that move slightly. Single 20kg bag or pallet of 54.

See also: single bags and pallets of 54.

Getting a level floor

  • Prime first. Bare concrete and boards need the right primer, or the compound won't bond and can lift later.
  • Mix to the maker's water ratio on the bag: too wet and it's weak and slow, too dry and it won't flow.
  • Work in bays and keep a wet edge. Rapid set compounds go off fast, so mix only what you can lay.
  • On timber or flexing floors, use the flexible Fast Flex grade so the surface doesn't crack.

How to get it

  • Single bags: collect from Gorslas. Call ahead on 01269 267030 and we'll have it ready
  • Pallets of 54: call Steve on 01269 267030 to arrange
  • Trade prices and trade advice on prep and primer before you buy

Not sure which grade, or how much you need? Call Steve on 01269 267030 for quick advice, correct spec first time.