Collection: Steel Frame Fixing Lugs for uPVC Windows

Window fixing lugs, also called cleats or uPVC window fixing brackets, are how you fit a uPVC frame without drilling straight through it. They screw to the back of the frame, then fix into the reveal, so there are no fixing holes through the face to seal and no risk of splitting or distorting the frame. This collection is the 202mm steel lug in pack sizes from 5 up to 100. Not sure how many you need? See our guide, What size uPVC window fixing lugs do I need?

What's in this collection

The same 202mm galvanised steel frame fixing lug, in packs to match the job:

• Pack of 5, a single window
• Packs of 10 and 25, a few openings
• Packs of 50 and 100, a full house or a site run

Fitting frame lugs

• Clip or screw the lugs to the frame before it goes in, spaced up the jambs and across the head.
• Fix within 150mm of each corner, then no more than 600mm apart down each jamb, and within 150mm of any mullion or transom.
• Add one near each locking point so the frame cannot flex.
• Pack and level the frame in the opening first, then fix the lugs back to solid reveal, not just the plaster.
• Lugs keep the frame face clear, so all you seal afterwards is the perimeter, not a row of screw holes.

Why buy frame fixing lugs from BHD

• Trade prices, buy the pack size the job needs, not a fixed box
• 202mm steel lugs, the standard uPVC window and door fixing
• Same-day Click and Collect from Gorslas, call ahead on 01269 267030

Fitting a run of windows and not sure how many you need? Call Steve on 01269 267030 for quick advice and the correct spec first time.